Description

DESCRIPTION

Revised 4/24

Small Mounted Breakers for Excavators

MB156 | MB256| MBF5 | MB05 | MB556 | MB10

STANLEY Infrastructure knows what you look for in a small mounted breaker, that’s why our MB series focuses on simplicity, easy maintenance, and powerful breaking performance. All MB breakers have only two moving parts – which means better performance and less frequent service intervals. At the lower end of the housing, we added steel reinforcement to not only protect the housing, but to protect the power cell and keep operators running longer. A superior valve design allows for a wider range of pressures and flows. lowering stress on components. Plus, the light tool weight contributes to a broader carrier range.

Features: 

•Advanced breaker design technology for output energy and efficiency.
•Minimal moving parts, only two  for less maintenance, better performance and less service.
•Superior valve design for operation within a broader range of pressures and flows with less heat and stress on components.
•Added steel reinforcement at lower end of housing to protect housing and power-cell.
•Side-plate bolt locking system keeps bolts from loosening.
•Lighter weight allowing choice of smaller carrier.
•Supported power-cell by rubber cushions and urethane wear plates to absorb shock and vibration and reduce wear – MB556
•Direct acting nitrogen chamber boosts the power of each hammer blow.

* SOME MODELS AND MOUNTING ARE NOT CURRENTLY AVAILIBLE.

 

SPECS

MODEL		MB156	MB256	MB05	MBF5	MB556	MB656	MB10	MBX15
Impact Energy Class	Ft/lbs	175	350	550	550	750	870	750	1500
Blows Per Minute	BPM	600-1200	700-1200	650-1550	650-1550	590-1100	600-1000		400-800
Weight (Tool & Mounting Brkt)	Lbs (kg)	173 (79)	493 (224)	480 (218)	463 (210)	752 (340)	872 (396)	750	1168 (531)
Length (Tool & Mounting Brkt)	In (mm)	42 (1069)	51 (1295)	53 (1350)	48 (1220)	63 (1600)	66 (1689)		69 (1760)
Tool Working Length	In (mm)	11 (279)	15 (381)	15 (381)	15 (381)	15 (381)	18 (457)		16.6 (426)
Tool Diameter	In	1.75 (44)	2.5 (64)	2.7 (70)	2.7 (70)	2.7 (69)	3 (76)	3	3.3 (85)
Hydraulic Pressure	PSI	1800-2100	1400-1700	1500-2000	1500-2000	1600-2000	1700-1900		1885-2200
Flow Range	GPM	4-10	9-16	10-22	10-22	12-22	16-24		15-25
System Relief Pressure (Minimum Cracking)	PSI	2600	2600	2600	2600	2600	2600		3000
Sound Power Level (LW)	dBA	116	122	126	126	124	121		126
MIN EXCAVATOR LBS.		1900	4000	5000	5000	7000		7000

SPECIFICATIONS

MODEL	DESCRIPTION
MB15600	Stanley – Excavator Mount – 6″ and 4″ Pin Centers
MB15614	Stanley – Excavator Mount – Flange Top
MB15641	Black, Q – Tach for Walk Behind – 6″ and 4″ Pin Centers
MB25600	Stanley – Excavator Mount – 9″ Pin Centers
MB25603	Stanley – Excavator Mount – Flange Top
MB25641	Black, Q – Tach for Walk Behind – 9″ Pin Centers
MB2570	Excavator Mount – 11″ Pin Centers
MB2570XC	Excavator Mount – Exchange Top
MB05E00	Stanley – Excavator Mount – 9″ Pin Center and Flange Top
MB05S02	Stanley – 4 Position Cradle Skid Steer – 9″ Pin Centers and Flange Top
MB05E04	Stanley – Excavator Mount – CP027 Top
MB05S04	Stanley – Skid Steer with CP027 Top
MB05E05	Stanley – Excavator Mount – Exchange Top
MB05S05	Stanley – Skid Steer with Exchange Top
MBF5E00	Stanley – Excavator Mount – Flange Top
MBF5E05	Stanley – Excavator Mount – Exchange Top
MBF5E04	Stanley – Excavator Mount – CP027 Top
MBF5S04	Stanley – Skid Steer with CP027 Top
MBF5S05	Stanley – Skid Steer with Exchange Top
MB55600	Stanley – Excavator Mount – Flange Top
MB55601	Stanley – Excavator Mount – 14″ Pin Centers
MB55607	Stanley – Excavator Mount – 14″ Pin Centers
MB5570XC	Stanley – Excavator Mount – Exchange Top
MB5570XCS	Stanley – Skid Steer with Exchange Top
MB65603	Stanley – Excavator Mount – Flange Top
MB65607	Stanley – Excavator Mount – 14″ Pin Centers
MB65609	Stanley – Excavator Mount – 1/4 Yard WainRoy
MB6560XC	Stanley – Excavator Mount – Exchange Top
MBX15E03	Flange Top
MBX15E00	14″ PIN Center BRKT
MBX15E09	1/4 YD Wainroy BRKT

BIG DAVE

Stanley can be a little tough to figure out what you want to order. The support documents and sales team are not much help. Let me take a stab at it and make a few comments.

• MB156  (175 ft lb energy class) very small hammer, up to 2500 lbs. loaders and 2000 to 4000 lbs. excavators. 4-10 GPM hydraulic flow range, Mini loader mount are not in the price book.
• MB256  (350 ft lb energy class) very small hammer, 2500 lbs. to 4500 lbs. loaders and 4000 to 9000 lbs. excavators. 9-16 GPM hydraulic flow range, Mini loader mounts are not in the price book
• MB05 / MBF5 (500 ft lb energy class) common size skid steer hammer, 4000 lbs. to 8500 lbs. loaders and 4200 to 12500 lbs. excavators. 10-22 GPM hydraulic flow range, All the specs read the same between MB05 and MBF5 I am not sure why there is a different model?
• MB556 (750 ft lb energy class) common size skid steer hammer, 4200 lbs. to 9000 lbs. loaders and 4500 to 12500 lbs. excavators. 12-22 GPM hydraulic flow range.
• MB10 (1000 ft lb energy class) common size skid steer hammer, 4200 lbs. to 13500 lbs. loaders and 8500 to 19500 lbs. excavators. hydraulic flow ranges are not listed in any of Stanley’s information. 
• MB15 (1500 ft lb. energy class) This hammer maybe used on some of the new large machines coming into the market.

Explore more from our collection.