Bradco Ground Shark SD Skid Steer Brush Cutter – Standard-Duty, Closed-Front, High-Flow Model

Description

DESCRIPTION

7/25

* This attachment requires a safety door during operation. Please call if you can’t find one or if you have questions.

Ground Shark™ SD Brush Cutter – Standard Duty Performance, Built to Last

The Ground Shark™ SD Brush Cutter is your go-to solution for clearing light to medium-density brush and hardwoods up to 4 inches in diameter. Designed for routine land maintenance, this standard-duty cutter features a direct drive motor for smooth, quiet, and efficient operation—even in tough conditions.

With a low-profile deck, the Ground Shark™ easily slips under fences and tight spaces, while the up to 78″ cutting width and three bi-directional forged steel blades ensure fast, clean cuts through a variety of vegetation.

---

Key Features:

• Cuts Material Up to 4” in Diameter

• Up to 78″ Cutting Width

• Direct Drive Motor – Smooth, reliable, low-maintenance performance

• 3 Bi-Directional Forged Steel Blades – Cut both ways to extend life and reduce wear

• Dual Pressure Relief Valves – Protect the hydraulic system from pressure spikes

• Quick & Safe Blade Shutdown – Audible alert during blade stop for added operator safety

• .25” Thick Steel Deck – Built tough for long-term durability

• Replaceable Bolt-On Skid Shoes – Easy maintenance and cost-effective repairs

• Low-Profile Design – Maneuvers easily under fences and low-clearance areas

• Deck Steps on Both Sides – Convenient for any carrier configuration

• Flexible Hose Routing – Configurable for left or right-side setup

• Deck Leading Edge Radius Guide – Smooth material flow and better control

---

Optional Add-Ons:

• MulchPower™ Gauge – Helps operators avoid overloading and overheating

• Dual Wheel Kits – Prevent scalping by keeping blades elevated

---

Whether you’re maintaining a pasture, clearing trails, or managing overgrown fields, the Ground Shark™ SD Brush Cutter delivers dependable performance for everyday brush-cutting tasks.

MULCHPOWER™ PRESSURE GAUGE (OPTIONAL)

Paladin MulchPower™ Technology provides live, dynamic power and loading feedback to the operator through a unique pressure monitoring gauge.  With MulchPower™ operators can see when the tool is fully charged and also when it is nearing a state of being overloaded, so that operating technique can be adjusted to maximize performance. 

• RUN AT PEAK POWER: Greater starting power improves cutting efficiency  and tool life, increasing overall job productivity and decreasing total   operating costs.
• AVOID STALLING: Greater starting power dramatically reduces the likelihood  of stalling.
• WORK WITH CONFIDENCE: Conditions change from job to job. MulchPower™  lets you be more aggressive when the job will allow it, letting you maximize  your production.
• GREEN – Optimal Operating Pressure
• YELLOW – Approaching Attachment Stall Pressure
• RED – Attachment Stalled/Not Recommended Operating Pressure

SPECS

MODEL	GS60SD	GS72SD(A)	GS72SD(B)	GS72SD(C)	GS78SD(A)	GS78SD(B)	GS78SD(C)
ORDER CODE	30360A-0022	30372A-0022*	30372B-0022*	30372C-0022*	30378A-0022*	30378B-0022*	30378C-0022*
COUPLER SIZE	1/2 IN	1/2 IN	1/2 IN	1/2 IN	1/2 IN	1/2 IN	1/2 IN
OVERALL HEIGHT	24 IN	24 IN	24 IN	27 IN.	24 IN	24 IN	27 IN.
OVERALL WIDTH	64 IN	76 IN	76 IN	76 IN	82 IN	82 IN	82 IN
OVERALL LENGTH	76 IN	88 IN	88 IN	88 IN	9 IN	94 IN	94 IN
CUTTING WIDTH	60 IN	72 IN.	72 IN.	72 IN.	78 IN	78 IN	78 IN
MINIMUM CUTTING HEIGHT	2 IN	2 IN	2 IN	2 IN	2 IN	2 IN	2 IN
CUTTING CAPACITY	4 IN	4 IN	4 IN	4 IN	4 IN	4 IN	4 IN
DECK THICKNESS	.25 IN	.25 IN	.25 IN	.25 IN	.25 IN	.25 IN	.25 IN
RECOMMENDED FLOW	15-25 GPM	15-25 GPM	26-32 GPM	33-40 GPM	15-25 GPM	26-32 GPM	33-40 GPM
REQUIRED LIFT CAPACITY	1200 LBS	1400 LBS	1400 LBS	1500 LBS	1500 LBS	1500 LBS	1600 LBS
WEIGHT	1120 LBS	1280 LBS	1280 LBS	1320 LBS	1360 LBS	1365 LBS	1405 LBS

FAMILY	MODEL	CUT WIDTH	CUT DIA.	CUT MIN.	LBS.	GPM FLOW	MOTOR	BI-DIRECTIONAL
STD DUTY	GS60SD	60	4	2	1120	15-25	GEROTOR	YES
STD DUTY	GS72SD(A)	72	4	2	1280	15-25	GEROTOR	YES
STD DUTY	GS72SD(B)	72	4	2	1280	26-32	GEROTOR	YES
STD DUTY	GS72SD(C)	72	4	2	1320	33-40	GEROTOR	YES
STD DUTY	GS78SD(A)	78	4	2	1365	15-25	GEROTOR	YES
STD DUTY	GS78SD(B)	78	4	2	1365	26-32	GEROTOR	YES
STD DUTY	GS78SD(C)	78	4	2	1405	33-40	GEROTOR	YES

BIG DAVE

The SD cutter is for general grounds maintenance. This cutter has a gear type motor and can handle up to 4″ material.

Explore more from our collection.